Hot Dipped Galvanized Steel Strip in Rolls for Production of C and
Z Purlins, Roller Shutters
COLD ROLLED STEEL STRIP COILS
The thickness of cold rolled steel strip is 0.1~3mm, the width is
100~2000mm. It made by cold reduction mill in the normal condition
on the basis of the hot rolled iron strip and steel plates. In the
normal condition or below the recrystallization, which called cold
rolled steel strip after rolling process.
It has the feature of smooth surface, high dimensional accuracy and
mechanical performance. Mostly process and export by rolls and
steel plate with zinc coating. The strip is widely used in place of
the hot pack rolled sheet of the same thickness. The single steel
chip rolling only used for the special purpose.
Cold rolled galvanised steel strips have a good performance, which
is easier to satisfy the thickness and the specification. It mainly
using for automobile, iron drum, construction and building,
bicycles, etc. The strip is the best material for the organic
coated steel sheet.